Common problems of spray guns and some solutions (1)

Update:28-03-2020
Summary:

Left or right reasons:(1)The fan control hole on the si […]

Left or right reasons:(1)The fan control hole on the side of the air cap is blocked;(2)Damaged air cap
Solution:
1.Clean atomizing cap
2.Replace the atomizing cap
Causes of excessively thick spray center:(1)Viscosity of sprayed coating is too high;(2)The spray pressure is too low;(3)The nozzle diameter and thimble increase and decrease due to wear and tear
Solution:
1.Reduce the viscosity of paint
2.Increase spray pressure
3.Replace the nozzle set

https://www.bestspraygun.com/

0
Views: 118