• Precautions for using paint spray gun (1)

    Precautions for using paint spray gun (1)

    1. Never immerse the paint spray gun in the solvent (use a neutral cleaning solution to clean the spray gun, pay attention to the pH value of the cleaning solution between 6 and 8); 2, please clean in time after using the automatic spray gun each time; 3.Use original tools to clean the spray gun; 4,... read more

    Jan 11,2020 Industry News
  • Precautions for using paint spray gun (2)

    Precautions for using paint spray gun (2)

    1. Install and remove the three-piece nozzle set according to the correct steps; 2. Do not use damaged nozzles; 3. Regularly check or replace the sealing ring of the automatic spray gun; 4.Adjust the spray width adjustment knob with appropriate strength; 5.Use clean compressed air; 6.Adjust the corr... read more

    Jan 17,2020 Industry News
  • Common hand gestures

    Common hand gestures

    The paint spray gun is held by the palm, thumb, little finger and ring finger. The middle finger and index finger pull the trigger. Some painters change the way of holding the gun from time to time, sometimes using only the thumb and palm with the little finger, and sometimes with the ring finger to... read more

    Feb 28,2020 Industry News
  • Some points to note when spraying

    Some points to note when spraying

    1. average coating distribution 2.The coating must not be too thick or too thin The distance between the nozzle outlet and the object to be coated is called the gun distance. The smaller the gun distance, the greater the spray pressure, and the greater the impact of the air pressure on the product, ... read more

    Mar 06,2020 Industry News
  • Causes of automatic spray gun failure during use

    Causes of automatic spray gun failure during use

    1. Erosion. When the liquid with a high flow rate passes through the metal surface at the nozzle hole, it will erode the nozzle hole, causing the nozzle pressure to decrease and the spray state to become irregular. The probability of nozzle erosion depends on the hardness of the liquid and the amoun... read more

    Mar 14,2020 Industry News