• Causes of automatic spray gun failure during use

    Causes of automatic spray gun failure during use

    1. Erosion. When the liquid with a high flow rate passes through the metal surface at the nozzle hole, it will erode the nozzle hole, causing the nozzle pressure to decrease and the spray state to become irregular. The probability of nozzle erosion depends on the hardness of the liquid and the amoun... read more

    Mar 14,2020 Industry News
  • Common problems of spray guns and some solutions (1)

    Common problems of spray guns and some solutions (1)

    Left or right reasons:(1)The fan control hole on the side of the air cap is blocked;(2)Damaged air cap Solution: 1.Clean atomizing cap 2.Replace the atomizing cap Causes of excessively thick spray center:(1)Viscosity of sprayed coating is too high;(2)The spray pressure is too low;(3)The nozzle diame... read more

    Mar 28,2020 Industry News
  • Common problems of spray guns and some solutions (2)

    Common problems of spray guns and some solutions (2)

    Spray splitting Reasons: (1) The paint viscosity is too low; (2) The spray pressure is too high; (3) The inner diameter of the fan control hole is too large; (4) The paint is insufficient; (5) The atomizing air passage is blocked. Solution: (1) Increase paint viscosity (2) Reduce spraying pressure (... read more

    Apr 02,2020 Industry News